1. Home
  2. »
  3. Bathroom
  4. »
  5. How to Easily Remove a Bathroom Sink Stopper: A Step-by-Step Guide

How to Easily Remove a Bathroom Sink Stopper: A Step-by-Step Guide

How to Easily Remove a Bathroom Sink Stopper

Share This Post

In a home, the bathroom holds a unique significance as we all desire our bathrooms to be clean and create a pleasant bathing experience. Many times, it is observed that the bathroom is so dirty that it doesn’t even inspire the desire to bathe. In such cases, we need to renovate the bathroom. If you are in New Jersey and require bathroom renovation and remodeling services, we, at Advanced Renovate, work with our best and professional team. We will explore a step-by-step guide on how to remove a bathroom sink stopper. Brought to you by Advanced Renovate, experts in bathroom renovations and remodeling, this guide is designed to make your life easier.

What You’ll Need:

Tools need to Remove a Bathroom Sink Stopper

  • Screwdriver (Flathead or Phillips, depending on your stopper type)
  • Plunger
  • Plumber’s Tape
  • Gloves
  • Bucket or Towel (to catch any water)

Step 1: Identify the Type of Stopper You Have

Before you begin, it’s crucial to know the type of stopper installed in your sink. There are different types of sink stoppers like a pop-up, lift and turn, and push and pull. Knowing the type will guide your removal process.

Step 2: Turn Off the Water Supply

Although removing a sink stopper doesn’t necessarily require turning off the water supply, it’s a good safety measure to take. Locate the water valve beneath your sink and turn it off.

Step 3: Remove the Stopper

For Pop-up Stoppers:

  1. Locate the pivot rod beneath the sink and unscrew the retaining nut holding it in place.
  2. Pull the pivot rod out slightly to release the stopper.
  3. Lift the stopper out of the sink drain.

For Lift and Turn Stoppers:

  1. Hold the base of the stopper and unscrew the top knob.
  2. Once the knob is off, lift the stopper straight up to remove it.

For Push and Pull Stoppers:

  1. Simply pull the stopper up to the ‘open’ position.
  2. Turn it counter-clockwise to unscrew and remove.

Step 4: Clean the Stopper

Before you go ahead and call it a job well done, take a moment to clean the stopper. A lot of gunk and hair can accumulate on it over time, which might be the reason you needed to remove it in the first place.

Step 5: Reinstall or Replace

Either reinstall the cleaned stopper following the removal steps in reverse, or replace it with a new one if it’s damaged or worn out. If you’re looking to upgrade, Advanced Renovate offers a range of sink stoppers that can match your newly remodeled bathroom perfectly.

Final Thoughts

Knowing how to remove a bathroom sink stopper not only saves you time but also some money that you might spend on a plumber for such a small task. Whether you’re dealing with a full bathroom renovation in New Jersey or just a simple DIY fix, the process is quite straightforward.

For more tips on bathroom remodeling in New Jersey or if you need professional help, don’t hesitate to contact Advanced Renovate. We are your go-to experts for all things related to bathroom upgrades and fixes.